CARDINAL RIM BLASTER

STANDARD FEATURES

(2) 20 Hp Direct Drive Blast Wheel Assy.
Blasts 12"-26" Rims
15" Diameter Blast Wheels
Electrical 460/208/3ph
Plc Controlled Timer
Low Noise Level
Safety Interlocks
Pneumatic Lift Door
Manganese Door
Cast Lined in Blast Zones, Balance is Manganese
Airwash Separator
Low Level Sensor, Shield, Indicator Light
5" Elevator Belt with Cast Buckets
1200 CFM Dust Collector (55 Gallon Legs)

CENTRIFIGUL BLAST WHEEL

WHEEL: Single sided efficiently designed blast wheel reduces the overhung load on the motor as well as the time it takes to change blades, impellors, and control cage. Standard blast wheel is 15” in diameter and has seven curved blades for optimum abrasive control. Components are balanced for smooth operation. High horsepower to weight ratio increases the abrasive delivery per horsepower.

MOTOR: Direct drive motor revolves at 3600 RPM. Taper lock bushed motor shaft with NEMA tolerance.

BLADES: Snap lock design eases blade replacement, no tools required. Curved blades provide maximum abrasive control and are cast from abrasive resistant alloy. Cardinal wheels allow for easy change out of blades.

CONTROL CAGE: Dial type cage for ease of targeting the abrasive flow.

WHEEL HOUSING: Steel plate is completely lined with cast chrome manganese alloy liners. All liners are replaceable.

cabinet construction

CABINET: Fabricated from 1/4” steel plate. Access holes in sides of cabinet simplify belt and liner replacement. Tramp metal collected on lower abrasive screen.

DOOR: Air operated power lock.

abrasive recycling system

BUCKET ELEVATOR: Centrifugal discharge belt and bucket elevator. 5” Elevator Belt with Cast Buckets. Screw adjusted shaft take-ups provide positive belt alignment.

ABRASIVE CONTROL VALVE: Totally enclosed butterfly valves are air cylinder operated. Fully adjustable for abrasive flow control.

ABRASIVE SEPARATOR: Single 20” lip separator.

ABRASIVE REQUIRED: 2000 pounds.

VENTILATION

DUST COLLECTION: Removes dust laden air from the machine while larger particles and abrasive are returned into the cabinet. Single 20” lip separator. 1200 CFM Required.

ELECTRICAL CONTROLS

CONTROL PANEL:

• Type 12 electrical enclosure.

• Thermal overload protection for all motors.

• Standard 230/460volt ammeter.

• Oil tight pushbutton controls.

• Timer controls the abrasive flow.

• Touch Screen PLC Controls.

SAFETY FEATURES: Blast wheel operational only when door is closed. Air lock prevents cabinet door from opening during blast cycle. Adjustable time delay allows the flow of abrasive to brake the blast wheel before the door can be opened.

ELECTRIC MOTORS: All motors are totally enclosed, and fan cooled to provide maximum life. Optional 230/460 volt 3-phase.

Blast Wheel: (2) 20 Hp/3540RPM – 46.20amps @ 460volts

Roller Drive #1: .50 Hp/1725RPM – 1.2amps @ 460volts

Roller Drive #2: .50 Hp/1725RPM – 1.2amps @ 460volts

Elevator Drive: 2.0 Hp/1725RPM – 2.96amps @ 460volts

Optional Dust Collector: 3.0 Hp/3600RPM – 3.8amps @ 460volts

NOISE LEVEL: Approximately 85 db.

DIMENSIONS

DIMENSIONS:

• Width: 102”

• Depth: 82”

• Height: 166”

SHIPPING WEIGHT: Approximately 5500 pounds.

REQUEST A QUOTE

*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE