AIRLESS BLAST UNIT
WHEEL: Direct drive blast wheel revolves at 3450 RPM. Standard blast wheel is 10” in diameter and has 4 curved blades. Components are balanced for smooth operation.
BLADES: Cast from abrasive resistant alloy for maximum life with a unique design for easy blade replacement.
CONTROL CAGE: Dial type cage
WHEEL HOUSING: 1/4” steel plate, completely lined with alloy steel liners. All liners are replaceable.
CONVEYOR: Continuous molded rubber tumble belt is 3-ply construction with standard 5/16” diameter abrasive drain holes. Rubber tumbling ridges. Variable speed. *Optional drain hole size.
CONVEYOR ROLLERS: Heavy duty rollers have 1-3/16” solid shafts. All rollers are mounted to the cabinet with standard 4-bolt flange bearings.
LINERS: 20” diameter barrel-heads are 3/8” abrasive resistant steel. Tight sealing abrasive resistant cabinet liners remove for belt access.
CAPACITY: 24” wide by 20” diameter mill will handle 2 cubic feet or 200 pounds.
CABINET: Fabricated from 1/4” steel plate. Access holes in sides of cabinet simplify belt and liner replacement. Tramp metal collected on lower abrasive screen.
DOOR: Air operated power lock. 1/4” neoprene door liner.
ABRASIVE RECYCLING SYSTEM
ELEVATOR: V-belt bucket elevator provides positive tracking and is easily adjusted. Heavy duty C-section elevator belt has multiple cord construction. Solid cast iron elevator sheaves. Hopper screen.
ABRASIVE REQUIRED: 150 pounds initial.
ABRASIVE CONTROL: Fully adjustable air actuated butterfly valve provides precise flow control of abrasive. Totally enclosed design means maximum noise suppression.
*OPTIONAL DUST COLLECTOR: Requires 400 CFM
Type 12 electrical enclosed, thermal overload protection for all motors, standard 230/460 volt ammeter, oil tight push button controls. Timer controls the abrasive flow, blast wheel motor and door lock. Mill bypass for blast pattern test.
All motors are totally enclosed and fan cooled to provide maximum life. Standard 230/460 volt 3-phase.
Blast Motor 5Hp/3450RPM
Mill Drive 1/2Hp/1800RPM
Elevator Drive 1/2Hp/1800RPM
Blast wheel operational only when door is closed. Door is electrically locked closed during blast cycle. After blast wheel shutdown, adjustable time delay allows flow of abrasive to brake blast wheels to stop before door can be opened.
80 DB (approx.)
Approximately 2,000 pounds.
*SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Cardinal Parts and Equipment LLC
900 South Hamilton Street, Sheridan, Indiana 46069, United States
Copyright © 2021 Cardinal Parts and Equipment LLC - All Rights Reserved.
Family Owned & Operated